What are the features of Deutz diesel engine?

What are Deutz power engine advantages?

1.High reliability.

1) The whole technology & manufacturing process is strictly based on Germany Deutz criteria.

2) Key parts like bent axle, piston ring etc. are all originally imported from Germany Deutz. 

3) All the engines are ISO certificated  and Military Quality System Authenticated.

4) Every engine is bench tested before delivered.

5) 15000 hours lifetime.

2.High fuel-efficient,much lower fuel consumption,saving more fuel cost

Fuel consumption is less than that of Cummins engine by experiments.

3. Good performance in high altitude and temperature

Well performance in high altitude.When altitude above 1000m, power decreases less than 0.9% every 100m higher. For example, the 292kw generator set will use 400kw engine at the altitude of 4000m.

4. Excellent cold-start performance  

1) For 6 cylinder engines, can quickly start at -19℃ without any added device; can normally start at -40℃ with auxiliary system.

2) For 8 cylinder engines, can quickly start at -17℃ without any added device; can normally start at -35℃ with auxiliary system.

3) All engines can realize one-time start at -43℃ with small circulation heating system. Performance is quite well in cold and high altitude areas.

5. Enviromental protection

1) Bare engine running can reach Euro II emission standard.

2) Much lower noise pollution:

@1500rpm:

For 6 cylinders engine,noisel level <94dBA @1M;

For 8 cylinders engine,noisel level <98dBA @1M.

@1800rpm:

For 6 cylinders engine,noisel level <96dBA @1M;

For 8 cylinders engine,noisel level <99dBA @1M.

6. Light weight and small size to save shipping cost

1) 6 cylinder engines: weigh 850kg, kw/kg (power-to-weight ratio) 0.43.

200kg lighter than Weichai engines, 1100kg lighter than Cummins under the same power.

2) 8 cylinder engines: weigh 1060kg, kw/kg is 0.46.

7. High degree of serialization

1) Strong versatility for spare parts, almost all the longitudinal components are interchangeable, lowering the difficulty of maintenance.

2) One cap  for one cylinder, lowering the cost of maintenance.


Post time: Sep-15-2022